Remote control portal FAAC XT2 SLH 868

• FAAC two-button remote control
• Self-learning coding
• Frequency 868.35 MHz
• Manual and battery included

• Easy to use
• Fast programming
• Product of the FAAC brand, specialist in automatic closing systems

For the registration of a new remote control you need a MASTER remote control already in use.
To activate your new remote control, please follow the procedures below:

1. Press the 2 keys of the MASTER remote control simultaneously and release them when the light flashes faster.
2. Take your new remote control in your other hand and place the 2 remotes head to head. You now have 10 seconds to copy the new remote control.
3. On the MASTER remote control press and hold the first button you wish to copy.
4. Then press and hold the same key on the new remote control. Wait until the LED on your new remote flashes twice and goes out, signifying successful programming.
5. Release the buttons
6. Repeat the procedure to memorise the other keys.

If you make a mistake, wait 20 seconds and then repeat the programming from step 1.

In this series of remote controls, there are :

• Master remotes (the light flashes once and then stays on when the button is held down) which can initialise another remote control and be initialised themselves.
• Slave remotes (the light on the remote control lights up constantly when the button is held down) which cannot initiate another remote control.