Remote control portal BFT MITTO-2M

To copy or add a new remote control to your receiver, a remote control must already be in use.

Here is the procedure to follow to start your new remote control:

1. Take a remote control already in use and approach the radio receiver of the installation (1 to 2 metres).
2. Insert a paper clip or other metal object into the small hole on the back of the already programmed remote control.
3. Press button 1 on the remote control already programmed.
4. You then have 10 seconds to press the hidden button on your new remote control.
5. Press button 1 on your new remote control.

Note: There is another model of MITTO 2/4 remote control that does not have a hidden button. In this case, in step 2, press both buttons on the remote control simultaneously until the LED on the receiver lights up continuously and then continue programming.

Wait 20 seconds until the receiver returns to "normal reception" mode and try to open the gate with the new remote control. If an error occurs, wait 20 seconds and then repeat the programming from step 1.