• Warranty 3 years
  • Shipping
    in 2 days

Power supply kit for safety edges LBH - RADIOBAND

Ref: LBH-RADIOBAND

RadioBand mobile is a wireless, bi-directional communication system for the management of safety edges.


100% Made in Italy 


£198.00

£149.00

Save 25%
Quantity
Power supply kit for safety edges LBH - RADIOBAND

£198.00

£149.00

Save 25%

Description

POWER SUPPLY KIT FOR SAFETY EDGES - LBH - RADIOBAND

In order to keep control of your LBH sensor bars, opt for this feeding system with mobile transmitter and fixed receiver called RADIOBAND  

    -          Complete equipment with mobile transmitter
    -          Simple to set up

    Technical data :

      -          For safety edge LBH

      The safety edge is one of the inseparable features of an automatic gate. It is used when an obstacle is detected in order to protect the gate and its users. In order to function, this equipment requires a number of accessories. If you are looking for an LBH cable sensor bar feed system, the best address is mistergatesdirect.com. Buy online and benefit from a cheaper price.

      THE SENSOR BAR, A SAFETY DEVICE DESIGNED FOR AUTOMATIC GATES

      The sensor bar, also known as the safety edge, guarantees your safety and that of those around you when you use your electric gate. The accessory is placed on the gate and is connected to the operator or, more precisely, to its control board.

      The sensor bar plays a significant role in preventing accidents. It prevents a person, an object or even a domestic animal in the path of the gate from being crushed by the gate when it closes. It is equipped with a sensitive rubber edge. When the rubber edge touches the obstacle, the device stops the gate travel immediately. To do this, it cuts off the power supply to the motorisation system. In addition to the rubber sensitive edge, the safety edge also has other elements, such as a resistive contact, an aluminium rail, end caps, a RADIOBAND power supply and a cable.

      In addition to protecting the users of the motorised gate, the safety edge also prevents the gate from being sheared and crushed. This means that with such a device, your gate can last longer. It should be noted that an electric gate, whether swinging or sliding, can accommodate a sensor bar and photocells at the same time. This enhances your safety.

      THE SENSOR BAR POWER SUPPLY: A VERY USEFUL ACCESSORY

      Among the accessories that a safety edge must have is the power supply. This often takes the form of two small boxes equipped with an electronic board. They also incorporate power supply batteries. As the name suggests, the safety edge power supply is used to power this safety device.

      In addition, the safety edge power supply system also serves as a connecting and control element. In the first case, the accessory connects the safety edge to the gate control logic. In the second case, its two housings, which act as transmitter and receiver, permanently monitor the operation of the sensor bar. If a fault is detected, the Radioband power supply prevents the gate control logic from carrying out any manoeuvre. All this ensures the safety of the users. In short, this accessory is not only used to power the sensor bar. It is also used to check the correct operation of this safety device at all times. Its status is regularly transmitted via the wired connection or radio technology.

      It should be noted that there is nothing complicated about the installation of a feeler bar feed system. Just follow the instructions provided by the manufacturer in the manual.

      OPT FOR THE CABLE CONTACT SAFETY EDGE - LBH - RADIOBAND

      Need an accessory to feed and control your touch bar? Mistergatesdirect.com offers you the LBH RADIOBAND cable contact bar power supply. In addition to powering your LBH safety edge, this accessory is also used to control the operation of the safety device. It consists of a mobile transmitter and a wired receiver. There is nothing complicated about installing this LBH RADIOBAND power supply for a safety edge. If you would like to purchase it, the best place to buy it is mistergatesdirect.com. With us, you benefit from a product with guaranteed quality and also from on-time delivery.

      Warranty

      • Warranty 3 years
      • Shipping
        in 2 days

      This product is guaranteed by the LBH brand network for a period of 3 years subject to assembly and installation in accordance with the instructions for use and use under normal conditions

      Features

      • Receiver power supply             : 12/24 Vdc Vac
      • Transmitter power supply            : 2x lithium battery 3Vdc
      • Receiver memory                    :  CR2032
      • Receiver consumption        : 14 transmitters 
      • Transmitter power consumption        : 0.5W (12V), 1.2W (24V)
      • Pressure test (IEC 695-10-2)    : Operating 17mA/ standby 16µA
      • Protection class                      : PCB (125°C) Wrap (75°C) IP67
      • Operating temperature   : -35° à 55°C
      • Homologation                                  : 954-1 Category 2 2
      • Battery life                : 4 months (Classe 2 over 18 mois)  

      Reviews

      Evaluate your product :

      FAQ

      The safety edge is one of the inseparable features of an automatic gate. It is used when an obstacle is detected in order to protect the gate and its users. In order to function, this equipment requires a number of accessories. If you are looking for an LBH cable sensor bar feed system, the best address is mistergatesdirect.com. Buy online and benefit from a cheaper price.

      THE SENSOR BAR, A SAFETY DEVICE DESIGNED FOR AUTOMATIC GATES

      The sensor bar, also known as the safety edge, guarantees your safety and that of those around you when you use your electric gate. The accessory is placed on the gate and is connected to the operator or, more precisely, to its control board.

      The sensor bar plays a significant role in preventing accidents. It prevents a person, an object or even a domestic animal in the path of the gate from being crushed by the gate when it closes. It is equipped with a sensitive rubber edge. When the rubber edge touches the obstacle, the device stops the gate travel immediately. To do this, it cuts off the power supply to the motorisation system. In addition to the rubber sensitive edge, the safety edge also has other elements, such as a resistive contact, an aluminium rail, end caps, a RADIOBAND power supply and a cable.

      In addition to protecting the users of the motorised gate, the safety edge also prevents the gate from being sheared and crushed. This means that with such a device, your gate can last longer. It should be noted that an electric gate, whether swinging or sliding, can accommodate a sensor bar and photocells at the same time. This enhances your safety.

      THE SENSOR BAR POWER SUPPLY: A VERY USEFUL ACCESSORY

      Among the accessories that a safety edge must have is the power supply. This often takes the form of two small boxes equipped with an electronic board. They also incorporate power supply batteries. As the name suggests, the safety edge power supply is used to power this safety device.

      In addition, the safety edge power supply system also serves as a connecting and control element. In the first case, the accessory connects the safety edge to the gate control logic. In the second case, its two housings, which act as transmitter and receiver, permanently monitor the operation of the sensor bar. If a fault is detected, the Radioband power supply prevents the gate control logic from carrying out any manoeuvre. All this ensures the safety of the users. In short, this accessory is not only used to power the sensor bar. It is also used to check the correct operation of this safety device at all times. Its status is regularly transmitted via the wired connection or radio technology.

      It should be noted that there is nothing complicated about the installation of a feeler bar feed system. Just follow the instructions provided by the manufacturer in the manual.

      OPT FOR THE CABLE CONTACT SAFETY EDGE - LBH - RADIOBAND

      Need an accessory to feed and control your touch bar? Mistergatesdirect.com offers you the LBH RADIOBAND cable contact bar power supply. In addition to powering your LBH safety edge, this accessory is also used to control the operation of the safety device. It consists of a mobile transmitter and a wired receiver. There is nothing complicated about installing this LBH RADIOBAND power supply for a safety edge. If you would like to purchase it, the best place to buy it is mistergatesdirect.com. With us, you benefit from a product with guaranteed quality and also from on-time delivery.

      Please wait...

      This item has been successfully added to your cart !


      You prefer to be called back :
      Your contact details are for the sole use of the Group Mister Menuiserie
      More details
      Please wait while processing the request